I'm doing a little bit of kitchen remodeling, overflow from my home theater remodeling. I'm adding some RCA input ports to a pre-existing low voltage wall plate that previously hosted just Cat5 and RG6. Problem is, when this plate was first installed (before I was here), enough room was made only for the cat5 and RG6 aligned vertically.
Low voltage wall plate cutout:
Current Wallplate:
As you can see from the picture, I rather foolishly thought I could just chisel the tile along the edges and break more off.
My question is somewhat twofold I suppose:
How do I properly cut the pre-existing backsplash tile, and how do I fix the damage I've already caused?
Best Answer
What would probably work best for cutting tile that has already been placed would be a quality oscillating tool with a diamond blade.
Diamond Blade
http://www.lowes.com/pd_349423-353-OSC312DG_0__?productId=3380378
You probably wouldn't want to use a carbide blade for tile or grout as it will get chewed up and damaged very quickly.
NOTE: Unless you are purposely trying to destroy an entire piece, it is never a good idea to chisel any type of glass or ceramic as you have already found out.