Below is an image of the hinge I need to replace. Just can not figure out how to remove it from the door side? 
Kitchens – How to remove a MEPLA cabinet door hinge that has no exposed screws
hingeskitchens
Related Solutions
I believe that flat metal plate against the door is a cover that will pry off. You'll find screws underneath.
It looks like a lockring is used to hold the screw in place. You'll have to hold the screw still and rotate the lockring, or vise versa.
Using a flat-head screw driver and mallet, is a common way to rotate lockrings. Though, you'll have to find a way to hold the screw steady, while you bang the lockring free.
- Place a flat-head screw driver blade against one of the sprockets of the lockring.
- Sharply rap the handle of the screwdriver with a mallet.
It's possible that the lockring is made of some type of softer metal, so grabbing it with pliers could easily damage it. Using a screwdriver and mallet applies force only in a useful direction, whereas pliers apply non-useful forces required for gripping. These non-useful forces may damage the lockring.
Related Topic
- How to change the hinge side on an LG LBN10551PV refrigerator
- Doors – How to remove this two-piece door hinge
- Doors – How do prevent door from swinging open
- Doors – How to install hinges after cutting custom door past wooden edges and composite exposed
- Doors – How to fix this door hinge
- Doors – How to remove door hinge cap
- Doors – How does a ball bearing door hinge work
Best Answer
Remove the two screws on the cabinet side, press down the tiny tab pictured at top right above, then twist the hinge to left (CCW) to unlock the hinge from the door. There should be a plastic plate underneath held by 4 screws.