Kitchens – What kind of IKEA screw is this

kitchens

This is a screw on the side of an IKEA drawer. On line videos say turn it left or right to level the front of the door. Instructions are to use a Phillips screwdriver. It's not a Phillips head and the local hardware store doesn't recognize it.
enter image description here

enter image description here

Best Answer

That's a Pozidriv head that might have been chewed up a little by the inappropriate use of a Phillips screwdriver.

enter image description here
Public Domain Image

Phillips #2 on the left, Pozidriv #2 on the right.

Pozidriv screwdrivers come in three main sizes, usually named PZ3, PZ2 and PZ1 from largest to smallest. There is also a rarely seen PZ0. The most common is PZ2. You should use the largest bit that will engage the screw fully.

Here are some examples of Pozidriv screwdriver bits for interchangeable-bit screwdrivers (hand screwdrivers and power screwdrivers)

enter image description here

It is essential to

  • Use a Pozidriv bit, never a Phillips bit
  • Use the correct sized Pozidriv bit.

Used correctly, Pozidriv bits are much more positive than Phillips and are far less likely to "cam-out" (lift and slip under torque).

Phillips screws often don't stand up to repeated use unless you are exceptionally careful. For use in the home, Pozidriv predominates in the UK and much of Europe. Canadian homeowners seem to prefer Robertson (square recess), others Allen (hexagonal recess). It may be that IKEA's European roots explain why it used Pozidriv for this application (although they seem very fond of Allen bolts).

Useful resources