I installed a new programmable thermostat back in December and it has been wonderful. It replaced a (probably) 50+ year old dial thermostat.
To my question – now that it is really hot outside (85+ degrees F), I have noticed that after my inside A/C unit has stopped, and the house is at the proper temperature, that my outside unit will continue to run. Sometimes it will run for 30 minutes, sometimes all the way until the inside unit needs to run again, and others it will shut off when the inside unit does. It's very inconsistent.
Any ideas if something may be wrong, or could it just be the newer thermostat cycles the unit differently than my old one? I never had this problem in the summer with the old one.
EDIT – Just to get this all in the question:
A/C Condenser – Trane XE 1000 – http://tranexe1000.blogspot.com/2014/11/trane-xe-1000-specifications-reviews.html
Air Handler/Furnace – Trane XE 78
Thermostat – Honeywell RTH2510 – http://www.amazon.com/Honeywell-RTH2510B1000-7-Day-Programmable-Thermostat/dp/B003XCAMR8
EDIT 2 – Wiring at the thermostat
Best Answer
You've got a wiring problem, or a bad circuit board somewhere.
It's possible that the condenser unit is wired to run all of the time, but some protection circuit is kicking in and shutting it down. If that's the case, you would probably have ice build-up on your coils.
What is more likely is a relay somewhere is sticking, and remains closed when de-energized. If you provide the model number of you air handler and your condenser, I might be able to provide more direction.