I am getting very low pressure due to my tank height in home. Input of tank got high pressure but not whole time. Something like below.
What my idea is directly connect input to low pressure end as below diagram. I have a doubt one way valve is reduced the pressure of high pressure end and low pressure end.
If I use like this, will I get high pressure when its available? (I do not have good idea how check valves are working)
Thanks
Best Answer
Yes: your proposed cross-connect will maximize pressure on the outflow. But, as aaron commented, you will need to put a second check valve on the low pressure line between the cross connect and the tank to avoid losing pressure back to the tank (or, worse, blowing it out since there is presumably no shutoff valve on the tank outlet).