I am used to working with PVC and CPVC, but these are copper pipes that I am thinking about adding in a water cooler that needs a water line. My question is, obviously I can't use the CPVC scissor like cutters to cut copper piping, so how would I cut the copper piping to add in a tee with 3 connections – one that goes up, one down to continue the flow as normal, and one that will come out that I can connect to the water cooler?
Thanks in advance all!
Best Answer
All depends on you. You can cut the pipe with a hacksaw, Sawzall, a copper tubing cutter like these:
You might have to cut a length of pipe out to fit your valve.
You could also use a piercing valve.
I don't endorse these products although good.