I'm trying to replace the bits inside my toilet. The water supply line is stuck where it goes into the toilet, The plastic connector seems "glued" to the fill valve assembly.
How can I get it off?
Plumbing – How to disconnect the water line from the toilet
plumbingtoilet
Related Solutions
I think @Tester101 has asked the pertinent question: Is the fill valve height adjustable? It is. You need to adjust its height:
You need a new washer inside the loose connection. The tank/hose connector is 7/8 inch (in the States). An "O"-ring of proper size will do. I've substituted the washer from a garden hose in a desperate situation. But it would be wise to purchase a flat washer specifically for the 7/8 inch tank connector.
Related Topic
- Plumbing – How to fix toilet with multiple leaks
- Water – Replace Toilet Water Supply Line
- Plumbing – Toilet leaking above coupler
- Plumbing – Filling up toilet bowl after flush to save water
- Replacing toilet supply line and valve
- Plumbing – PEX Line Toilet Water Supply Disconnect
- Plumbing – How to remove stuck locknut from porcelain toilet
- Dripping supply line from the toilet cut off valve
Best Answer
If the line is made from solid copper (often chrome plated), it sometimes has a bit of tension in it, making it appear to be stuck to the fixture. Try gently pushing it in different directions while pulling down.
If the line is a flex line, it may be stuck with a bit of mineral buildup; try gently wiggling it back and forth.
If you're not comfortable with the amount of force needed, it may be too much. Consider calling a pro rather than breaking something.