Plumbing – In the attached picture is 9/16″ referring to the compression fitting end’s internal diameter? What 90 pushin should I buy to work with this hose

fittingplumbing

I need to buy a 90 push in that has male NPT that matches this below hose end.
I am not sure what to buy and if the 23-9/16" means 23" long hose and 9/16"ID for the compression fitting
What 90 push in fitting that works with this should I buy?

enter image description here

Update: This is a follow up or a sequel of this thread Would a 1/2×3/8 Dishwasher Tube to Pipe Elbow, 90 take a 3/8 flex connect for a shower pannel? where I was told not to use the fitting I was asking about because it is for a dishwashere and it will reduce the volume. So now I am trying to find the right 90 that would be push in on one end and it will take the above compression hose

Best Answer

23-9/16" means 23 tpi and 9/16" in diameter - tpi is threads per inch.

Standard sizes so any decent hardware / plumbing store can help.

Related Topic