This putty is starting to crack and leak onto my basement ceiling. Is this repair as simple as removing old putty and applying new? Or is this practice now (or always has been) frowned upon and is there a better, more professional method of resolving this leak?
Plumbing – Plumber’s Putty on outside of tub drain is cracking: Replace with same or something better
leakplumbingputtyrepair
Related Topic
- Drywall – What are the structural and health issues for a long-time slow-leaking toilet
- Walls – What Material for Basement Walls
- Is sealing a leak from the inside of the roof a bad idea
- Plumbing – Garbage disposal replacement: how much to replace
- Plumbing Solutions – Fixing a Drain Trap Leaking at Compression Joint
- Leak Repair – How to Fix a Leak from the Pipe in the Basement Connected to the Kitchen Sink?
- Plumbing – Incorrect Tub Drain Installation
Best Answer
Plumber's putty would be used to attach the drain cover to the sink. It creates a blockage and suctions both pieces together.
It should be a ring of plumber's putty, when smashed is maybe a 1/2" wide.
What you have is a DIY disaster and looks like someone was trying to use plumber's putty to repair a possible leak. The problem is if it is exposed to "air" too long it eventually gets hard, dries out, and cracks... So not so good at repairing leaks in pipes.
I am guessing there is a leak in the pipe. You probably need to reset the drain cover with new plumber's putty. Once installed you should barely be able to see it from below. You will probably also need to fix the pipe leak which may mean buying a few pieces of PVC, primer/glue, and an adapter. If you are OK with doing it yourself it is a $15 job if that.