I'm trying to purchase the correct toilet flange but having difficulty.
The bathroom was roughed in years ago in ABS and we are trying to finish it out. As a I measure the toilet waste pipe, it measures 3 1/2" inches from outside edge to outside edge. The inner diameter (inner edge to inner edge) is more like 3 1/8"+. So, we are close to 3", but it is still slightly wider than 3".
The last flange I purchased advertised itself as "able to fit INTO a 3" ABS waste pipe", however it was in actuality the exact same diameter, so it did not insert into the pipe… it just sat on top and was of course no help.
Before I make yet another trip back to the store, I wasn't sure if there was any wisdom out there on the best product to go with given my situation and pipe measurements. Or perhaps I'm not understanding the terminology
Thanks.
Best Answer
The outside diameter is more important with PVC pipe because that's how the fittings attach. For instance, DWV (drain) pipe and SCH40 pipe have way different wall thicknesses (so different inside diameters) but the same outside diameter.
That said, you have a 3" pipe there, and should get a flange made for 3" pipe. What you will typically find will be a "3x4 toilet flange" that will fit over a 3" pipe (flange has a 3.5" inside diameter) or into a 4" pipe.
You may have purchased a flange made to go into a 3" fitting previously.
Your comments indicate this is a concrete slab, and you can't connect around the 3" ABS pipe, so a 4x3 flange won't work as it sits. You have two options in that case.
The easiest is to get a flange designed to fit inside ABS pipe specifically, like the Sioux Chief 888-A. This is simple, but some people scoff at the push-to-fit flanges as unprofessional.
The other option is to chip out concrete around the pipe and use a standard 4x3 flange with a stainless steel ring. This will securely glue to the pipe and be more like what a plumber would have done if they were installing the toilet from new.