Why does my oil furnace keep triping reset after 10 sec of running i have to have thermostat all way up for it to run i changed primary control box, nozzel, electrodes and thermostat any ideas
Problems with oil furnace
heating
Related Topic
- Why does the Thermo Pride oil furnace need constant restarts
- Actual efficiency of an old oil furnace
- Electrical – Goodman gas furnace limit switch opening, blower only runs with a/c
- Possible to oil the Furnace Fan Motor theself and with 3-in-1 Motor Oil
- Furnace Blower fan doesn’t start
- Fuel oil burner running intermittently
- Force Furnace Blower to Run on Separate Schedule to Circulate Air
Best Answer
There are many reasons an oil furnace will trip out. The control box is looking at Flame, draft, fuel supply, water levels in a FHW system, heat exchanger (water) temps, fan function (FHA) fyreye, etc. A problem with a circulator pump will cause an water high temp shutdown for example. A one hour service call from a licensed tech probably would have cost less than replacing a bunch of parts that are not the problem. My advice is always to consult a pro unless one is equipped with the knowledge and tools to do the job.