I would like to put this table on 2 wheels so I can wheel it around and move it outside to my patio.
I have these but not sure how to mount them on the legs.
Edit: Thanks for the suggestions, here's what I did:
Best Answer
1) Cut a sheet of plywood so that all 4 legs fit on it.
2) Mount the wheels to the plywood.
3) Set the saw on top of the plywood.
4) Fasten the legs to the plywood so the saw won't fall off. I suggest some "L" brackets and screws through the legs but other means could be devised.
Best Answer
1) Cut a sheet of plywood so that all 4 legs fit on it. 2) Mount the wheels to the plywood. 3) Set the saw on top of the plywood. 4) Fasten the legs to the plywood so the saw won't fall off. I suggest some "L" brackets and screws through the legs but other means could be devised.