I've just purchased a house with an old Genie garage door opener that uses the simple dip-switch remote configuration system (no rolling code, in other words). The garage has two doors, each with its own opener. Given that the size of each opener is roughly the size of a box of cheap cigars, the range is terrible (need to be within ~10 feet), and the remote generally feels like you're going to break it when you push the button, I'd like to replace the two remotes with a single smaller remote. There are a bunch of different options on sites like Amazon, Lowe's, Home Depot, etc., but most of these seem to be geared toward openers with rolling code systems. Will these remotes work with the sort of opener I have? FWIW, the current remote I have is a Genie GT90-1.
Replacing the remote for an older garage door opener remote
garagegarage-door-opener
Related Topic
- Doors – Do I need to replace the garage door opener or just the remotes to upgrade to rolling code technology
- What could be causing the garage door to randomly open and close
- Diagnose interference causing garage door opener remotes not to function
- LiftMaster Formula 1 intermittent remote control problems
- Garage door won’t open or close when the opener light is on
- I have two remotes, one stopped working
Best Answer
I purchased a Chamberlain KLIK1U 2 button universal garage door remote a little while back and remember there being a dip switch option. I'm not sure if you can program two dip switch openers to it, but it might be worth a try.
Another option which is the one I had to do is that if you have a button inside the garage that you press to open the door, you can get a pair of Chamberlain 955D receivers. It allows you to use a rolling code remote on the opener. If you used one for each opener, you could get one remote with several buttons and program it.
I hope this helps!