I have an attic that is semi-converted. I want to install eclectic outlets at 7 locations. I am wondering which conduit is better to use the PVC rigid one (pipes) or the flexible one. From what I could find the rigid one is mostly used for outdoor installations. Also is there any nice looking conduit that would be a good choice for this?
Electrical – Running PVC Conduit in a Converted Attic
attic-conversionconduitelectricalwiring
Related Topic
- Wiring – Securing Cables at Ends of Conduit Run
- Wiring – interpretation of conduit vs raceway wet location vs outdoor vs NM NM-B
- Wiring – choices besides UF-B wet damp location not inside conduit
- Electrical – Garage surface conduit feed an outdoor outlet
- Electrical – repurpose an unused 6″ radon pipe as an electrical conduit
- PVC Conduit – How to Extend PVC Conduit Already Installed
- wiring – Best Material for Low Voltage Conduit on Face of Wall
Best Answer
I wouldn't use PVC or "the flexible one". I'd use either:
There are several types. EMT is the least expensive, and should be fine for attic use. A key advantage of metal conduit is that it provides a ground path, so that saves running a ground wire. An advantage or disadvantage, depending on your design preferences, is that it has an industrial look. Personally, I think metal conduit + metal boxes + metal faceplates is a great look. Definitely good for a workshop. But if this is a really finished room then it may seem out of place.
This is a specific product made by Legrand. There may be other similar products out there. It looks more "finished" than regular PVC and metal, with everything from surface raceways (the conduit itself) to junction boxes, elbows, power strips and other accessories available. Short of running cables or conduit inside finished walls, this is the most "finished" look you're likely to find.