What is recommended for Connecting 1" Schedule 80 PVC threaded fittings to prevent leaks. I have tried pipe dope, but leaks developed between nipples and elbows. Do you have any suggestions.
Sealing threaded PVC pipe
pvc
Related Topic
- Plumbing – Per IRC, are flexible PVC couplings ever allowed to be used above ground for PVC to PVC connections
- Plumbing – Flat PVC Cap to fit a 3″ PVC pipe
- Electrical – PVC conduit into PVC box: Can I make it watertight when using a threaded fitting? Are sealing locknuts allowed
- Plumbing – Is is okay to run 4″ PVC drain pipe on the outside of a house
- Plumbing – PVC pipe end cap fitting, with center hole and offset hole
- How to protect the underground sprinkler PVC pipe from tree roots
- Water – Plastic Barb to PVC Pipe pipe fitting
Best Answer
We use liquid sealant all the time with great success at 1-1/2" diameter and less.
Make sure you are coating the threads completely and evenly.
Some dopes require coating both male and female ends over certain sizes.
Maybe try a different brand.
Might just use teflon tape instead.
Plumber we know for a large local company uses teflon (to seal) and pipe dope (to lubricate) at the same time although we do not practice the same.
If these don't work, look at your threads and make sure they do not have a scratch or nick in them.