Installed flange windows often have a gap where they're shimmed. This gap will usually be covered by casing.
Should it be caulked before the casing is installed?
Should I caulk window gap behind casings
caulkingwindows
Related Topic
- Fixing poor caulk job at aluminum siding and window trim
- Shower – How long does caulk need to dry in a 1″ gap
- Exterior Window Casing in Brick Exterior
- Doubts about quality of wood-frame construction
- Should I caulk the top and bottom of the windows on the outside
- Should the tiny gap between exterior window trim and the window housing be caulked
- Wood – Should I caulk the gap between a wood threshold and concrete
- Should I fill in gap between window frames
Best Answer
No. It would take a massive amount of caulk and you'd have a real mess. Or yes, if you consider spray foam "caulk", which it is in a sense. Water sealing is done outside. The seal(s) at the outer face of the wall handle water and and air intrusion concerns, ideally. Modern techniques for that involve flexible tapes and housewrap membranes.
Traditionally that void would have been filled with fiberglass insulation. In recent years we've taken to using spray foam from disposable cans, which provides both insulation value and a nice air seal, and it offers the added benefit of stability for the window. It should not be relied upon for water management, however.
Also, be sure to use the "minimal expansion" variety, as the original version is very likely to bow your window frames (jamming the sashes) and will end up all over everything once it squeezes out. Once urethane (foam, glue, varnish) dries on something it will be there a very long time.