I'm installing painted MDF crown molding, and I wasnt sure which method for covering nail holes is technically correct. Is using caulk considered a shortcut? Or is filling in the holes with wood putty and then painting only for the super perfectionist with too much time on their hands? I already filled in some of the holes with caulk, and I can't really see them when standing on the floor. My only concern is that it will reflect light differently since the paint is semi-gloss.
Should I use caulk or wood putty and paint to fill nail holes on trim
caulkingpaintingtrim
Related Topic
- Wood – the best way to fill finishing nail holes on door and floor trim
- How to fill a gap between the exterior wall and trim
- New paint cracking on caulk bead along exterior trim and j-channel flashing
- Use to fill gap between unpainted wood trim and wood sill
- What paint should I use over decorator’s caulk so that it matches the surrounding area
- Trim separating–caulk or wood putty
- Reuse nail holes when replacing oak trim
Best Answer
The key criteria for me is the size of the holes. If you used brads, then I have no problem with using caulk, especially on baseboards. The only possible downside is if you leave a fingerprint in it. You have to have eagle eyes to pick out a small hole like that.
With crown molding though, I'd plan on a lightweight spackle. Mostly because of the cost and effort you already put in installing it, might as well finish it nicely. Vinyl spackle works great, but again if the holes are small, just about anything made by DAP works fine. If you find yourself with a large hole, bondo (auto filler) does amazing things. Or you can use painter's putty, glazing, just about anything can be made to look really good. Sand and touch-up as needed.