I use a hot water pump for my shower (it is not a combi boiler). The pressure and temperature are excellent on taps but when I switch it to the shower it is fine for a minute and then starts getting cold. The issue is that it is too sensitive to cold water and a very small change in cold water tap makes it frozen or very hot!!! the issue is just in shower.
Shower – Hot Water Pump Too Sensitive to Cold Water Pressure
pumpshower
Related Topic
- Shower – Can disconnecting the cold switch on a shower pump save money
- Plumbing – How to house hot water pressure be kept stable if more than one hot tap is open
- Plumbing – Understanding the combi-boiler
- Plumbing – What would cause the shower water to start hot and then, after a minute, settle on warm water
- Shower water cold
- Plumbing – How to equalize the oscillating cold and hot water pressure in shower
Best Answer
this sounds like a problem with a thermostatic balancing valve in the shower valve. you may have to pull the cartridge and clean it out or replace it. these valves use a setup that can act strangely with time and gunk. start with the simplest thing first.