Does anybody know how to put this (https://www.us.kohler.com/us//productDetail/screw/626005.htm?skuId=589148) set screw into a Stillness Kohler shower handle (https://www.us.kohler.com/us/stillness-rite-temp-valve-trim-with-lever-handle/productDetail/handle-trim/1270658.htm?skuId=1270570&brandId=empty&)? I can't figure out the right hex key to make it work. It seems like a 2.5mm is too big, and a 2mm is too small. Do they make 2.25mm hex keys? Or is it perhaps a proprietary Kohler tool that I'm missing?
Shower – Kohler set screw for shower handle
shower
Related Solutions
Confirming from the fine manual it appears you're on the right track-- remove the set screw then pull.
You may be able to use a faucet puller tool for slightly more leverage.
If there is a buildup of mineral deposit or corrosion you may need to use a chemical to loosen the threads.
Problem solved. There is no set screw. I just needed a little more force to wiggle it off.
Related Topic
- Shower – Kohler Push Button Diverter Leaking from Shower
- Shower – What backer board for Kohler Choreograph in the shower – osb or greenboard
- Shower – Trying to remove a single handle shower faucet with stripped out set screw
- Shower – Pfister shower handle
- Shower – Unable to remove shower handle due to stripped allen screw
Best Answer
The instruction sheet you provided says you need a 3/32" allen wrench.