Our shower remodel was just completed and our tiler intentionally left the edge of the shower wall and floor unsealed. This seems strange to me but he insisted that it should be left unsealed. He said that if water ever works it's way behind the wall higher up it'll need a place to drain out instead of collecting inside the wall. Is this correct or should we seal this bottom edge? Is there any risk to leaving it unsealed?
Shower – Should the edge of a tiled shower wall and floor be left unsealed
caulkinggroutshowertile
Related Topic
- Shower – Replacing shower head – thread sticking out of wall is too long
- Shower niche tile unfinished edge
- Shower – Floating tiled shower wall and a Schluter type edge
- Shower – Cracked grout at shower floor/wall intersections – how much do I remove
- Shower – Regrouting, what to do with screw holes
- Plumbing – Attaching shower head arm escutcheon to wall
Best Answer
Yes, that's normal. Any water that does penetrate the grout lines (keep in mind that grout is NOT water tight) needs to go somewhere. There should be an impermeable material behind the tile that will allow water to flow down the wall and into the pan.
If you seal the bottom, that water will be trapped and will eventually leak into something else.