Stove Temperature Control broken

Without being able to test and troubleshoot your coils it is difficult to say but it appears your coils are two 120 volt coils with a center common to both coils. The white wire marked "Com".

You would need to take a voltage reading on the two outside terminals of the coils to see if you get 240 volts.

If that is the case, then a two wire heating element would connect to the two outside wires and the center wire would just get capped off.

Range heating elements are normally rated for 240 volts.

Good luck!

Fixed the issue by flipping over the bracket that hinges on the springs. now it open and closes correctly.

when it's correctly inserted there is a kind of "clicking" noise and the bracket moves with far less restrain.

basically it's the same as show in the pictures, the bracket with the "circle" indent in the middle needs to be flipped over. the springs then attach the same way.