What is the best way to find out which color wire goes to which color screw? Does the white wire go to the silver screw sometimes, and sometimes to black?
I have a three way switch which has a green screw and a black screw and three brass I don't know which one is which.
Switch – Is the black wire always hot on a three-way switch
switch
Related Solutions
Here's a diagram. On the left the hot wire comes in and is switched to one of two wires going to the othe switch. The right switch selects eithe the on or off wire from the other switch. So either switch can be toggled to turn the light on or off.
Wiring diagram for Leviton PR180 3-Way Wall Mount Occupancy Sensor.
Related Topic
- Electrical – Adding a ceiling fan single switch in a box with 3 way switch in older house
- Switch – How to wire this Leviton switch
- Electrical – GFCI outlet/switch combo installation
- Electrical – Single pole three toggle switch
- Switch – Installing an insignia connect smart switch to three black wires and a bundle of three white wires
- Wiring – Light Fixture Stopped Working After Replacing Its Three-Way Switch
- Switch – How to wire a switch with two black wires and one yellow wire
- Electrical – Which wire goes to which terminal on this single pole switch
Best Answer
Basic 3-way switches
When working with basic 3-way snap switches, the switch should have four terminal.
Common, COM, or C
This terminal will typically be black, or some color other than green or silver. It may be brass, in which case it will be labeled or marked in some way as common.
The common terminal will either be connected to the ungrounded (hot) LINE wire coming from the power source, or to the ungrounded (hot) LOAD wire going to the load (lights).
Ground, Earth
This terminal will typically be green, and will likely be either at the top of the bottom of the switch.
Travelers
These terminals will commonly be brass. These terminals are used to carry power between the switches, and will alternate being live. Depending on how the switch is toggled, one of these terminals will always have voltage (assuming the circuit is working properly).
Smart switches
These types of switches will usually offer some extra functionality, other than simply turning the lights on/off. Because of this, the switch may also require a neutral wire.
Neutral
The neutral terminal on a smart switch will often be silver, and is used to connect a circuit neutral wire to the switch.
Wire colors
Wire color is meant to help determine the function of a wire, however, it can often be wrong. White wires can, from time to time, be used as ungrounded (hot) wires (though they're supposed to be marked when they are). Your best bet, is to never trust the person that installed the wiring, and always test the wires yourself.
3-way circuits
A 3-way circuit should look something like this.
3-way circuit
However, wiring in a building is not typically this straightforward. So you might find cases where power goes to the light first, or other strangeness.