This bedframe seems to have a slot joint system but I can't seem to understand how to take it apart. There are two pegs I think will allow me to slide the side out but I'm not sure how to get the pegs out.
Taking apart wood bed frame with no screws
bedroom
Related Solutions
This is how I solved exactly the same problem in my bedroom:
It may be that the frame was originally designed to have slats span the rails, and not have the mattress (box spring) sit directly on the rails. This would have lifted the mattress up a bit, and possibly allowed it to ride over the bits that are giving you trouble.
This was one persons solution:
Related Topic
- Walls – use bolts to attach a bed to the walls of the room
- How to build canted riser for queen mattress
- How to heat up the apartment to kill bedbugs in Southeast Asia
- How to tightly join two perpendicular pieces of wood in a loft bed from the inside corner without access to the outer side
- How to take apart this bed frame joint with hidden screws
- Are these screws for bracket enough to support adult queen bed
- How do i unscrew this bolt to take apart the bed frame
Best Answer
That looks like the board just slides upward. See the slot underneath the board? Lift up on the board with the pegs, and gently tap the board with the slot downward using a hammer or something. The board with the pegs probably has some J hooks that slide into the slot and hook over a peg, dowel, or whatever that crosses through the slot.
Edit: Here's a picture likely resembling what you have that goes into that slot.