The purpose of the rear end of a roofing hammer

As others have said, a framing hammer is a specialty claw hammer.

So what makes it different? First, weight. A framing hammer is typically 20-32 oz, compared with 10-16 oz for a "normal" household claw hammer. That helps it pound large nails in only a few blows. Related to that is the much longer handle on a framing hammer.

Second is the face of the head: it's waffled to prevent slipping off the nail head, helping prevent bent nails. A regular claw hammer will sometimes have a textured face but not nearly as pronounced, and the face may also be smooth. A regular claw hammer often also has a domed face to allow a skilled hand to sink a nail below the surface with minimal surface damage: that's a feature you won't see on a framing hammer.

Third, the claw is straight since it is optimized for prying boards apart. A regular claw hammer is optimized for pulling nails.

If you're only building a garage, I'd recommend using your regular hammer rather than buying a framing hammer. (Or best of all, just go rent a nail gun!). For inexperienced carpenters, the time spent hammering will probably not be what slows you down. Also, the framing hammer is tiring enough that after a couple hours you may actually be faster with a smaller, regular claw hammer.

If you do get a framing hammer I recommend a lighter one. You'll work faster when you use it, you won't lose much power over a heavier hammer, and you'll feel much better on the second day. In 2010 if you hammer enough that a 32oz hammer makes a difference versus a 24oz hammer, you have a nail gun anyhow.

I think it would be used for pulling or twisting something. For example, you would attach a wire to it, then engage the drill or manually rotate, thus twisting or rotating the wire. It would also be used for fishing the wire thought a wall. The rotation would allow it to more easily pass.