windows
So I replaced the weather stripping on all of my very old windows yesterday. The windows are sash windows. In the process I unfortunately broke two of the spring-loaded things that hold the top part of the window securely into the frame's guides. Here are some photos of both one I didn't break, and the individual disassembled parts:
So, my questions are:
Thank you!
The pictures you added, were edited with info to help you decide which way you want to go.
There are 3 options to choose
1) Out right replacement of the whole window sash and all.
This is the most expensive way to go about it.
Its benefits are the ability to check the condition of the framing. Windows leak over time and unseen damage will be hidden.
The other considerations are you may need to remove your siding and reset some of it to get you new windows in with their preapplied trim in place. Then again, it is a newer style of window versus sash weights, and the trim or nailing flange will fit very nicely. There is a chance you will need finish it off by covering it with a PVC brick mold.
2) Renovation kit with sash and jamb. These fit a new jamb with sash directly into the existing jamb, saving the existing trim and labor removing the jamb and trim. You only need to remove the sash and track.
3) Use a jamb reliner kit
Those are safety catches that prevent the window from being opened all the way.
They pop out, and with the window unlocked, they let it open just a few inches. Supposedly an intruder cannot open the window enough to crawl in, and more importantly a child cannot crawl or fall out.
If these little catches are not in place then all you have are cosmetic closure caps.
Here is a photo:
Best Answer
It is a tilt window latch. Use this hardware replacement company There you can upload a photo of the part you need they may be able to identify it. (I have no affiliation with Swisco.com).