I installed pebble tile on my shower floor, but haven't grouted it yet.
I read to pre-seal before grouting, but later read a warning to only apply sealer to the top of the tile and be careful not to let it drip onto the sides.
Too late, because I used a couple coats of "511 Seal and Enhance" sealer and I got some on the sides and edges of the pebble tiles.
I'm worried about the grout not adhering to the pebbles properly and later separating.
What should I do? Any idea going forward?
Best Answer
Clean out the joints before grouting. Use a grout saw or abrasive wrapped around a stick to remove any sealer on the sides/edges of the tiles.