The previous owner re-tiled the master bath floor. There are two places that look unfinished. The first is where the floor tile meets the bath tub tile:
And the second is where the tile meets the cabinets:
How do we finish these two interfaces?
Tile – finishing a tile to tile edge
tile
Related Topic
- Tile – Support for Tile floor
- Tile – Leaking whirlpool tub; in alcove, but no tile flange at bottom of walls
- Shower niche tile unfinished edge
- Concrete – What should be used between a concrete tub and wall tile
- Flooring – Sanded Grout in Stone Tile Floor Keeps Disintegrating
- Tile – Suggestions on tile edging
- Tile – Best way to do some tile floor repair
Best Answer
Caulk. Something that matches your floor grout is preferred so go with a regular or even sanded colored silicone caulk (I have used this). I did notice that some of the tile is butted on the other tile and some with a good 1/8-1/4" gap. I would lay a layer of caulk down on the large gaps flat to tile. Let it dry two days then put a layer that is beveled throughout so that you have about 1/8" bead on the "top" of each tile piece.