I got this picture from another post and since I am new to this community I dont know much on how i can ask questions to existing posts or comments also it did not allow me to do so.
Below is a picture which closely resembles to what I have. The distance between laminate and tile is 7/8th of an inch. So ideally I was looking for a T molding where one side is thicker(lets say something greater than 5/16" on one side and 5/16" on the other) and one side is thinner to cover up the height difference but I havent found something like this in Lowe's /Home Depot/Floor and decor. If anyone knows where I can found something as described please tell me ?
For using reducer of this kind If I can get something like below that would help too:
Final question: Do you think the space left (7/8th inch) between laminate and tile is very small and if I make that wider then I would have more options on the reducer ?
Best Answer
I've had that exact situation, and found that the only type of transition strips that allow for this kind of height difference are ones meant for carpets. They tend to be metal, but wood ones can also be found. Below is an example. You would still need to build up the gap in between a little in order to have some support underneath and have something for the nails to go into.