Soon, we'll be gutting and redesigning our fireplace surround, similar to this picture. Which way would be best for mounting a tv?
- Tile the whole wall top to bottom, drill through the tile into the studs, mount the tv
- Measure the current tv mount plate, mark it on the wall, tile around it, allowing the tv to be mounted more securely directly to the concrete board / studs then over the rather soft travertine tile she's chosen. Save some tile in case someone decides to take down the tv and put the original tile in it's place
- Build the box big enough to accommodate a "someday" bigger tv one of these days when she's not home to stop it 🙂
The concerns we have with mounting the tv on top of the tile are:
- It's a brick style tile that isn't flat.
- The tv mount we currently have – a 30 inch extending articulated mount is heavy enough, let alone the 80lb 50 inch plasma it holds. I'm concerned the weight of the mount + tv would crack the tile after multiple pushes and pulls. The mount and tv are about 120lb combined, not including the forces exerted pushing and pulling it from the wall and rotating the tv.
Best Answer
If I were you I would frame in a 2x10 flush with the tile roughly a little longer than the TV's mounting bracket. It would be hidden for the most part behind the TV and would be secured to the wall studs for extra strength. It can be painted too.
As a side note, it's important to use pressure treated lumber if building on top of an existing fireplace.
Our TV is mounted above the fireplace. It uses a special hanging adapter made by the TV company that uses a steal cable so it literally hangs like a picture. I used two 5/8 lags with washers to hang it, but could have opted for a normal TV hanging mount. Though it would have probably not have been flush.