Tile – What products will make installation of subway tile over laminate backsplash successful

I am going to give you a very short answer to a very involved topic. Ceramic and porcelain are basically similar products. There are very good and very cheap versions or each product. When you go to your supplier, ask about the hardness rating. Softer cheap tile usually has a redish tint on the back side and is made from softer clay, typically in Mexico. Some of the better grades come from Turkey, Italy etc. and have hardness ratings of 5 or above and have a gray or whiteish back. Most ceramic tiles have a thinner glaze finish than Porcelain. I usually prefer a porcelain glaze on a good hard base in shower and bath applications. Rather than hitting the box stores first, go to a few tile specialty tile stores where a good knowledgeable sales person can give you a good education on the differences. If and when you feel comfortable with your knowledge about tile, find a professional flooring liquidator in your area where you may save anywhere from 40 to 80% on overages, returns or closeouts. I recently purchased 600 sq feet of Turkish porcelain grade 5 commercial tiles for 60 cents a square foot that retailed for over $8 a foot, at a local flooring liquidator. (overages from a hotel job) Huge savings.

Tile is generally installed as a permanent fixture. Removal is intended to be difficult - in fact easy removal is a clear indicator that the installation wasn't done well. The sub-material is often destroyed in the removal process because of the force necessary for removal of the product.

DITRA, being textured, would hold onto the mortar used to mount the tile. The only thing more complicated about demo where DITRA is involved is it's one more layer to be removed.