Our living room has walls that transitions into the ceiling with a curved surface…the radius of the curve is a few inches I think.
What is this kind of construction called?
ceilingwalls
Our living room has walls that transitions into the ceiling with a curved surface…the radius of the curve is a few inches I think.
What is this kind of construction called?
Best Answer
If the radius of the wall to ceiling transition is on the order of 1 to 2 inches then that corner is likely formed by use of a vinyl inside corner beading. It comes in lengths and inserted up into the corners and nailed / screwed along the edges through a flange that gets covered over with a feathered edge of drywall mud to blend the beading to the wall and ceiling surfaces.
Sometimes a wood material is also used that looks similar to a cove moulding but that would more than likely not be used up against the drywall in a mudded in smooth transition.
In decades gone by it was sometimes popular to create much larger radius transitions that could be a radius of 6 to 8 inches (maybe even more). These would be seen on plaster construction where curved backer corners were installed to the wall/ceiling lathe and then additional wood lathe was attached to these to create the curved surface. A professional plasterer would then plaster the wall and curved transition up to the ceiling all in one continuous process. Sorry that I cannot provide a name for that type of construction.