enter image description hereMy 3-year-old undersink water filter system stopped working (i.e., no water comes out). I changed the filters but still no water is flowing. Any suggestions on where to look for the blockage? My contractor did not leave a manual for this device and I cannot tell who manufactures it.
Water – How to figure out why the undersink water filter system is clogged
kitchen-sinkwater-filtration
Related Topic
- Water – Why is there no water after replacing the filter in a Samsung refrigerator
- Water – use a zero-waste reverse osmosis filter with a water softener
- Plumbing – hook up under-sink water filter to sprayer outlet on faucet
- Water – How to connect or secure this 2.22 cm water filter pipe to the 2 cm faucet spigot
- Water – My RO water filter system has three filters. What is the fourth filter
- Water – Does this water filter look clogged
- Plumbing – Connecting a 1/4″ RO Filter Inlet to Undersink Cold Water Line
Best Answer
If the filters are the twist-lock type (o-ring that tightens with a 1/4-turn) they may not be fully seated into the filter port. Remove the filters and re-install them making sure to apply enough upward pressure to fully seat the filter. BTW: the Aqua-Pure web page will have this filter. Here is the link: http://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Aqua-Pure-Under-Sink-Water-Filtration-System-Model-AP-DWS1000-1-per-case-5583101?N=5002385+8709316+8709366+8710655+8710937+8711017+8711350+3294748997&rt=rud