So at the top of that 90 elbow it is a very slow leak and into the concrete is another slow leak off same elbow… I tried soldering but it just falls right off/breaks even when it becomes a molten ball it rolls right off… could I just pump the hole and that upper part full of epoxy and call it good? Otherwise how do I go about properly repairing that… I tried uploading the image can't for whatever reason but the elbow part is a 90 degree up and it's partly in the concrete from the main line…
Water – Very slow leak out of main line at elbow out of concrete
copperfittingwater-pressure
Related Topic
- Plumbing – Adding whole home water filter to the main water line line
- Copper water water line is out of round slightly
- Plumbing – Would Replacing an Existing 3/4“ Water Main Line with 1” Improve Overall Volume/Flow to House (GPM)
- Plumbing – After a water main line repair on our street, our hot water stream for the bathtub suddenly is very weak. Could the pipe be clogged by debris
- Water Pressure – Main Water Line from 3/4 to 1 Inch: Meter and Pressure Considerations
- Water Supply – Identifying a Black Object on a Main Copper Water Line Before House Entry
Best Answer
You need to explain what the pipe is for, what fluid is inside, where is it located. From your writing you are probably looking at having to do some excavating to gain access to the pipe. If you are trying to solder a line full of something like water, It shows that you have no experience to make the necessary repairs and it time to call for professional help before you do something that can hurt you or can't easily be fixed