We recently bought a house in which the previous owner had installed a Culligan softener system with not only brine and resin tanks but also a chlorine tank with a pump. There isn't a Culligan representative remaining within a 50 mile radius of the house, the ones outside of that range aren't willing to come without a huge fee (understandable) or at all.
The salt part is easy. What I don't know is what kind of chlorine solution or pellets or powder or [???] should I be adding to the chlorine tank? Google is usually my friend, but not on this issue. I don't want to just dump a bottle of Clorox in there, since I don't know (a) if sodium hypochlorite is the correct chemical for use in water treatment without poisoning us all to death, and (b) what other odd chemicals are in Clorox that will poison us all to death.
Our water is sourced from a well that is by itself fails on lead (0.023 mg/l) and is heavily laced with iron (20.4 mg/l). What can almost not be made out in the pictures below is a 10" carbon pre-filter (you can see the bottom sticking out from under the controller on the resin tank). The pre-filter does a pretty good job of removing the iron, though we have to replace it every 2 to 3 months.
There are two tanks that are obviously labeled Culligan; the third is of a slightly different color; no brand name on the tank itself, but written in blue ink are the words "gallon chlorine" (possibly a faded numeral before).
On the top of the tank marked "chlorine" is a pump:
Best Answer
This looks very similar to a pool chlorine feeder - these could use cal hypo or sodium hypo, either way you would need to know the concentration to mix and the dosing for your qty of water to treat. Not sure we'll be able to answer those questions directly.
Sodium hypo - bleach - would be the cleanest option, but also will become ineffective the quickest.
Cal hypo is granular (and cheapest) and has the most shelf life, but you'd probably want to source food grade supply for long-term use.
Concentration of chlorine would be determined by the qty of water to be treated at one time, level of final level of chlorine needed for decontamination, how the chlorine solution is dispensed (continuous or on demand) and how much chlorine is dispensed at any given cycle.
Chlorine would only be used to correct organism growth not other chemical/mineral constituents of concern.
Due to the health risks, I 'm not sure how much I'd trust free advice at this point. Spend the money and be sure this is set up properly. Your health is worth it.