I have a MODEL # INCA HC HILO72 hood range
One of the light bulbs has burnt out. Tried to take out the light bulb but the screws are way too tight and afraid of stripping it. What type of screwdriver should I use? Already disassembled the part to make it easier to work on too.
Note: I am a female asking for assistance. Thanks
What type of screwdriver should I use to change the light bulb in the range hood
hood
Related Topic
- Lighting – replace 1 volt lights with 2 volt lights
- Range Hood – external blower: Is the design different
- Kitchens – use instead of a ducted range hood in the kitchen
- Kitchens – What happens if range hood is smaller than cooktop
- Kitchens – How to prove the kitchen exhaust vent egress
- Kitchens – Is it viable to vent a range hood back into the kitchen
Best Answer
After a little searching i found the documentation for . your unit
installation and use PDF
AND
Parts PDDF
I would suggest you replace the halogen bulbs with led bulbs. Your bulbs have a base that is called a GU10 BASE. they now make LED bulbs with that base such as these. led gu10 bulbs They will last for decades as opposed to replacing halogens frequently and will use much less energy than halogens.
When you get your old bulb out you can take it to the store to make sure you get a bulb with the same base and the same size so it will fit in your unit. You may find em at the big box stores or you may need to go to a lighting store.
Having change a few of these i should say they can be persnickety. you kinda gota push in on em while turning em and there usually is nothing grab on to for purchase. Make sure you fingers are dry and oil free and push just the right amount. its tricky.