What’s the deal with propane fittings

propane

I'm going to be removing the regulator off a grill to use with my RV since the port the gas will be coming from is already low pressure. As I search for fittings, will any brass-like fitting be sufficient?

For example, https://www.amazon.com/gp/product/B003OYJF32/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER ..

It's lead free brass with NPT threads (which I'm guessing is better?) Anything I should stay away from? Anything I should seek out? I think what gave me pause about this particular fitting is it has a rougher brass appearance and doesn't specifically say anything about what kind of pipe it should be used on (some of the other fittings say gas, etc)

As long as the fittings are brass and don't leak, do I have anything to be overly concerned about?

Best Answer

Short answer, no.

From my personal experience with replacing the gas line for my water heater:

  1. Don't buy on Amazon. Go to your local store if possible because if you buy the wrong thing (which you'll inevitably do if you don't know exactly what you're doing), returning it is a pain. Besides that, some plumbing products on Amazon seem to be more expensive for some reason.

  2. All pipe should have NPT threads. Lead free brass is only useful when you're dealing with potable water. Gas applications shouldn't matter

  3. I just used black steel because it's significantly cheaper than brass and since there's no water running through it to rust it, it'll work just fine.

  4. Make sure you use a teflon type tape that is rated for gas lines.

Related Topic