Which type of welder is the best for pretty delicate welds

welding

I have some experience with Arc welders and a little with MIG. However the rods and metal I have welded with are big compared to the 1/8in metal I will be working with. Getting a cheap MIG welder is not cost effective if I have to buy a tank with it. Never done TIG. Looking to upgrade my DIY skills and not break the bank to do a project.

I am looking for a welder to accomplish the following:
Not break the bank! Under $200 $100 preferable
Finished weld needs to be pretty as the final piece will be on display.

Recommendations for ARC MIG or TIG?

Best Answer

If you're good with a stick welder, stick with it(no pun intended). Just use a 3/32 rod and set your welder amperage at around 90 Amps. Do a little practicing. As far as "pretty" goes, that will totally depend on your experience but you can definitely get those results with a stick welder.