Need to replace a battery powered detector. Do most of them have the same sort of back plate or will I generally have to attach a new back plate? Do they usually come with a back plate?
Will most battery-powered smoke detectors attach to other back plates
smoke-detectors
Related Solutions
In our area, local codes made at least one CO detectors mandatory in all condos and rental units. I have had to replace dozens of standard smoke detectors with combo units in hard wired/battery back-up systems. Most every manufacturer makes a CO/Smoke unit that will plug in directly to the existing system. A hard wired replacement is far better than a stand alone battery operated unit, as it will alarm all units in the system if there is a problem.
Having the system monitored or not monitored makes absolutely no difference on how the system works inside the house. All monitored systems will work fine in the house even if the monitoring system is off.
I take it the detector is mounted in the ceiling, and a cut-in 3-O or 4-O (plastic) boxes have a 2 hour fire rating. If this is not enough then you can use metal ceiling octagon box (2 hour fire rating) and use something like a 3M Fire Barrier Moldable Putty Pads. Most companies that deal with fire related caulks and putty make these. A lot of states require these in fire walls and ceilings, especially in multi-family units.
These pads are intumescent, which means that it swells as a result of heat exposure, thus increasing in volume, and decreasing in density. Wikipedia.
If I were you I would take it a step further and install a 120V with a battery back-up smoke/carbon monoxide combo units. You can also pay more for the detector and get either optical or ionization styles. Ionization detectors are more sensitive to flaming fires than optical detectors, while optical detectors are more sensitive to smouldering fires. Wikipedia again. Electrical supply stores should have all this or Amazon. I suggested 3M only because that is what I am used to.
Also, since the electrical boxes are fire rated, you might just use a fire caulk around the box. Caulks are intumescent also.
Related Topic
- Electrical – Do modern energy saving light bulbs class as “fluorescent lighting”
- Electrical – Can an electrician run wiring to convert battery powered smoke alarms to wired alarms
- Smoke Detectors – What to Do About a Smoke Detector That Beeps Constantly
- Wiring – How to verify the integrity of smoke detector interconnect wires
- Smoke Detectors – CO Detector Beeping Every Morning at 6am
- Hardwired Smoke Detectors, go with sealed battery units or unlocked with lithium 10 year batteries
- Technical reason why there are seemingly no smoke detectors that are battery operated, dual sensor, and interconnected
Best Answer
Yes, they come with a back plate, if you get the same brand (if still available) they might fit. But you'll get all the stuff you need to install them as it were a first time install.