I'm trying to install a stove but I'm stuck on the wiring. There's an l1, l2, n1, n2 and pe wire sticking out of the wall. The stove has four attachment points for the wires. I don't know how to attach the wires in order to make it 220-240 volts. How am I supposed to wire it?
Wiring – How to wire L1, L2, n1, n2 and pe wires to install 220v-240v stove
stovevoltagewiring
Related Topic
- Wiring – 3 white wires and 1 black wire in ceiling fixture
- Wiring – Adding a 3/4-wire 220v receptacle
- Electrical – Ceiling lamp wiring problem
- Electrical – I’m replacing an old 3-wire motion sensor with a new sensor that has 4 wires. How to install this
- Electrical – Wire Up a Double Rocker Switch and Normal Rocker Switch
Best Answer
None of the drawings in pic 2 want 2 neutrals. So the relevant lineside wiring in pic 4 is the one your hand is covering, with black-brown as two hots, and gray as 1 neutral.
Now we need to sanity-check our power requirements for the stove. The stove lists its max power as 7kw. That is 30.4 amps at 230V. Two 16A hots can just feed that, if the loads are balanced in the machine.
Now there is only one wiring diagram in pic 2 that wants L1-L2-N-PE. That is the drawing on the lower left.