I recently posted a request for help to wire a Woods 59018 digital timer switch, which I learned was not a three way switch but could be used an override-ON. Unfortunately the directions I followed for the override ON option did not work, maybe because the switch is defective. So I got a multi-mode Honeywell RPLS530A, which has only three wires and comes with a jumper cable. Again, I'm hoping someone can complete the attached diagram, telling me which wires to connect.
Wiring – Need help wiring a 3-way Honeywell digital timer switch
switchtimerwiring
Related Solutions
I was only able to get it to work with two companion switches. The Lutron series does not work properly with two occupancy sensors. My goal was to get the apt on top and the entry way to have the lights turn on when the tenant or person entering opens the door.
I like the lutron; works really well and turns on only when needed if its truly dark.
This is how its the four way with companions would be wired
(source: tyronnephotography.com)
See the diagram and the description for 4-way.
http://www.lutron.com/TechnicalDocumentLibrary/048435.pdf
Based on what you've shown, you should be able to wire it up like this...
However, those red Wing-Nut® twist-on wire connectors are only rated for a maximum of 6 #14 conductors. So you'll have to split up the neutrals in to two groups, and connect the groups with a pigtail between them.
Best Answer
You should follow the instructions included with the device.
So your diagram will look like this...