designdeskwoodwooden-furniture
I am planning on building my girlfriend a vanity desk where she can apply her special make-up and all that lady stuff she enjoys as my anniversary gift. I have a concept in mind but one thing I know I want is for the legs, table, drawers and mirror to assemble and dissemble easily. The whole desk will be made out of wood because she loves wood.
My question is what are the nails or screws that make this possible. Just so I know so when I walk into home depot I will know what to look for.
I use 2 3-drawer file cabinets with a 8 foot door. It works really well. Adjustment higher can be done with some 1/4"-1/2" pieces of plywood but the height works well for me. It has the added benefit of storage.
Once you decide on the weight load and the aesthetic aspects of your table, you can determine the distance between supports using the "Sagulator" (online Shelf Sag Calculator) located at http://www.woodbin.com/calcs/sagulator.htm.
Legos (being plastic) are generally pretty light, so unless you have an incredible amount of them, probably most hardwoods or edge-banded plywoods are going to do just fine for you. I like to have supports underneath a table at least every 2 feet, even for light loads, since some woods will sag under their own weight over distances much longer than that. But again, give the Sagulator a try if you really want to be sure without buying a bunch of expensive wood and trying it yourself.
As far as affordable, Pine or Fir is probably going to be one of the cheapest things you can find, but it's soft, so it's not the strongest if you have a lot of weight and wide spans. Poplar is relatively inexpensive for a hardwood, and does pretty well for shelving, tables, cabinets, and quite a few other applications.
The easiest option is probably plywood or some other relatively light composite material. Any kind of plywood should be a good bet since it's dimensionally stable, comes in a few standard sizes, and you can rely on its factory edge as a straightedge if you don't have a ton of experience or tools to verify angles yourself. It's also easily cut with a circular saw (which I'll assume you have if you're planning on building a table). It can also be veneered with various laminates for a smooth surface or stained if you want the wood to show.
You might also be interested in watching videos on building tables so you can get some of the basics down. There are some designs out there already that are pretty widely accepted for expanses similar to what your plans indicate. While you won't need all the detail of either of these, they should help you understand more about stretchers, aprons, and supports, including where they're located and how they're reinforced.
http://www.finewoodworking.com/arts-and-crafts-coffee-table-video-preview/
http://www.thewoodwhisperer.com/videos/trestle-table-pt-1/
I also find it helpful when designing a piece of furniture to do a few image searches for something that resembles the style I want. This way you can pick out things you like from various designs that have already worked for someone and incorporate them into your own. Here are some things I found for bespoke tables:
Best Answer
Ikea tend to use these widgets whose name you may have temporarily misplaced:
Just because Ikea doesn't stock it doesn't mean you cant do an Ikea hack