adhesivewoodwooden-furniturewoodworking
I have a base that is 650mm deep. I'm going to have to glue several planks together to get this depth and, eventually, the last two to make the 650mm base. The problem is, I don't have (and can't see for sale) 650mm clamps to do this. As it's 2m long, I'd need quite a few clamps to do it.
Can anyone think of any alternatives?
Yeah, that 4" would be a long cut. It could be done in two passes, one from each side. The middle area would have a bit of an overlap and maybe a blade mark, but that could be sanded down. Plus you are probably going to finish it anyways.
What I would recommend though is changing the shape of your transition piece to make it easier to cut, and would also make it more pleasant to walk ok. I posted a similar question regarding a transition from tile to hardwood. Although your question is different, some of the answers there might help you out. For example, take a look at the shape of this transition piece:
In your case, this would be 3 separate cuts instead of one long one. Also the flat top surface will make it more pleasant to walk on vs. the angle (point) you have at the top of your example.
Scrape off all the old adhesives then use Liquid Nails on the back. Pre-drill, countersink, and screw it into the door. You can use caulk, liquid nails, or wood filler to fill in over screw holes and then re-prime and paint.
Best Answer
If Bessey K style are not in the budget, Bessey H pipe end clamps are very economical, with new lengths available for the price of an iron (or steel) pipe.
Found these on Amazon UK