Wood – How to fix a spot on new Poly finish

Pine is a difficult wood to stain under the best of situations. Pine has areas of different density, color, and resin (pitch) content. Using a product like Minwax prestain helps a bit. Follow the timing instructions carefully when using a pre-treatment. Little tips: i like to apply a liberal coat of oil based stain with a sponge brush. Let it set a few minutes, then rub it in and evenly distribute with a lint free rag. As one rag becomes saturated with stain, I use a second drier rag to finish the rub in. The wetter rag is great for distributing the color. You don't want any really wet stain remaining on your wood after the rub in. Once you get to the urethane, sand lightly between each coat with 220 grit paper to remove any dust bumps. Remove all sanding dust with a slightly damp cloth, let it dry and apply next coat. Again, I prefer a good grade sponge brush, but a good grade regular brush for oil/urethane works good for appling the urethane. Remember, thin coats, and sand between each coat.

It's possible it's just the cool temperature and it will dry in a few days. It won't hurt to let it sit several more days and see if the tacky areas harden up on their own.

However my suspicion would be a compatibility problem between the urethane finish and the "green" mineral spirits. Although they probably say then can be substituted for real mineral spirits, I've heard of mixed results when using them for thinning oil based finishes. For a future project you could select all water-based finishing products which would have lower VOCs and would not require thinning with any solvents. Or use standard mineral spirits for thinning and save the "green" ones for cleanup.

If the finish doesn't harden on its own I would try to remove most of the finish from the tacky areas as you described. I would do it in stages with some drying time inbetween because if you remove too much you will likely also remove some of the stain resulting in inconsistent shading. In that case you may need to strip and refinish a larger area (or live with the spots).