I currently have a hardwood floor that is worn down by an office chair and it needs to be fixed, optimally without having to do the whole floor with a floor sander.
As you can see in this photo:
the area to the top right is worn, in some places down to the wood. This is a close-up photo of the center:
It's 80% bare wood with little stain.
(on a side note, if you have an office chair on a hardwood floor, you should probably get a floor covering of some sort)
My objective is not necessarily to fix it perfectly, but to get it to look good enough to satisfy the landlord when we leave. I was planning on: buying a very light stain and applying it via light spray to the central area, repeating until the color was uniform with the rest of the floor, and then coating with some semi-gloss.
Is this a feasible solution for my problem? Any ideas or suggestions?
Best Answer
Before you apply any stain, try dampening the area with mineral spirits (which will evaporate off fairly quickly, unlike water). That will give you some idea of what color the wood will be if you just apply a clear varnish over it. Also remember that oil-based finishes will tend to add some yellow to the hue (as will shellac). It's possible that you don't actually need to do anything more than giving it a light scuff-sanding and a new coat or three of whatever's already there.
Remember to do something to keep the chair from wearing thru again too quickly... felt pads on the chair legs, an area rug or chair mat, non-marring wheels...