Does the Nintendo Switch USA charger work with 220V power

First, you need to check your connections. If the cable has a black box along it, you have a transformer to step the voltage down, before it reaches the console. If not, you only have to worry about the connection to the console.

Both should have a sticker or engraving to display the electrical requirements for input and output. Provided the plugs match, you generally have to match three things; voltage, polarity, and amperage.

Voltage

Voltage is the most important, as you need to match this exactly, on both ends. Not enough, and your system probably won't start. Too much, and it will probably fry itself.

First, you need to match the power output, from the wall.

Most countries use 240 volts. A few select places, such as the U.S. and Japan, 110 volts. You might even find the console/transformer supports both. If there is a difference, you will have to buy a step down/step up transformer. If you're not sure where to get one of these, you can try an electrical wholesaler, or any store that sells fuses.

If the cable used a transformer, you will have to match the voltage it outputs with the voltage the console accepts.

According to a couple of forums I visited, most notably, a post where a user is attempting to confirm an alternate transformer, the SNES takes a 9V power adapter. You should still confirm with your console. I can not stress this enough, voltage is easily the part I see most, where users mismatch the requirements and do irreversible damage.

If you're not confident in checking the numbers, again, take it to an electrical wholesaler. While they may not, necessarily, have stock of the required parts; they will be able to confirm if the adapter is correct, and offer support, if it is not.

Polarity

I've rarely seen this to be an issue, but if you use positive polarity when you need negative polarity, it certainly will be.

This should not be an issue, at all, if you are not using a transformer. In fact, I have only seen this be an issue with "multi-transformers", where you could actually change the polarity. When I have seen this mismatched, it led to frying the device and/or starting a large fire.

If you are using a multi adapter, included instructions should provide details on changing the polarity. Keep in mind that polarity is often represented by a symbol, as opposed to the words "positive" and "negative".

Amperage

Lastly, you will need to match the amps. Generally, this will be displayed as amps (A); but may be displayed as milliamps (mA). There are 1000 milliamps in an amp.

Generally you are allowed to exceed this value, but some argue that you should not go too much over the requirement.

According to Nintendo's support page on the topic:

The following types of microSD cards are supported on Nintendo Switch:

microSD (up to 2 GB) microSDHC (4 GB - 32 GB) microSDXC (64 GB and above)

Important: In order to use a microSDXC card on the Nintendo Switch console, a system update is required.

Also, they mention speed class:

Up to speed class 10 for the SD type (minimum guaranteed speed: 10 MB/sec) Up to class 1 for the UHS type (minimum guaranteed speed: 10 MB/sec).