Ok So I have a bunch of X-01 Mk.III mods in my inventory. My question is if I buy a Power Frame can I somehow attach them to it? Or can I take my T-51 suit and take the gear off that and replace it?
Fallout 4 Power Armor mods
fallout-4
Related Topic
- Fallout – do with stripped Power Armour Frames
- Fallout – Obtaining missing parts for power armor
- Fallout – Sustained flight with Fallout 4 Power Armor Jetpack
- Fallout – How to repair completely broken power armor if it is not already equipped to a suit of power armor
- Fallout – ny way to get power armor to a settlement without wearing it
- Fallout – How to un-steal power armor
- Fallout – Which Power Armor is the most cost effective in terms of repair
Best Answer
A frame can have any mix of power armor pieces from any type of model on it. You could have T60 arms with T51 legs and an X01 head and chest, for example. These can be swapped out at-will at a power armor station, or, if you're currently wearing the frame, in your pip-boy's apparel page.
Each piece can have mods added, like a VATS overlay for the helmet or a blood cleanser for the torso. Mods can only be attached to pieces from the same model. A T51 blood cleanser cannot go on a T60 torso. To change the mods on a piece of armor, you need to use a power armor crafting station.
You say you have some X01 Mk III mods. In order to use these, you'll need a frame. For each mod, the frame will need the associated X01 piece. If you have a Mk III leg mod, you'll need an X01 leg. These pieces cannot be crafted, but instead must be bought or found.
To attach mods to the pieces on the frame, you'll need to bring that frame to a power armor station. There, you can attach any mods you already have, provided that there is a matching piece on the frame. For each piece on the frame, you can also craft any mods for which you have the prerequisite perks and materials.
In short, a mod needs to go on the matching armor piece from the same model, but armor pieces can go on any frame with any mix of other pieces.