How to duplicate the blue Waldo’s routine with the red one

spacechem

I have a reactor for which I'd like to double the throughput by using both Waldos to perform the same routine. While they can't be exact duplicates, I'd like to start the blue Waldo routine off by duplicating the red one. What's the easiest way to apply the blue Waldo's routine with the entirety of the red's?

Best Answer

Simple. First, make sure there is nothing on the blue waldo, this would only get in the way. Then:

  1. Select the whole red waldo path.
  2. Use ctrl+drag to copy the entire red waldo path.
  3. Then right click the result, and click blue layer.
  4. Move the entire thing to the right location.

Make sure not to deselect the parts between step 2 and 3, as the correct stuff is already selected. Also, if the red path covers the entire screen, this will be a lot harder. Do it in steps and add parts manual where needed. Using shortcuts to place commands is quick too.

Edit: If red covers 100% screen, there is still a way to copy half of it into blue like this:

  1. Select half the screen.
  2. Right click it and select blue layer.
  3. ctrl+drag the blue layer to the other half of the screen.
  4. Select the original half again and right click to make it red.
  5. Either hide or lock red by clicking in the lower right at layer controls.
  6. Move the blue part back to the original location.
  7. Repeat with half of the remaining half.