As you probably know, induction burners produce an alternating magnetic field that induces a current in the cookware. This process can produce attractive and repulsive forces as well that cause vibrations.
The problem can be caused not only by poor sandwiched construction but by an uneven bottom surface, or loose parts or lids.
I have read that some people have successfully used silicon baking pads to dampen the sound.
This page has some useful information on the subject:
http://theinductionsite.com/proandcon.shtml
If all the seasoning is completely removed, it will look shiny like brushed or polished metal. This takes a lot of time, and often power tools. I would first ask whether this is what you want to do: does the pan feel waxy, and have a surface that turns glossy when heated? Then there is wax which can be easily removed with a scrub-brush while water is boiling in the pan. Finish with a little soap and hot water, and you're ready to season.
If it is, in fact, the seasoning you want to remove (if, for example, it is coming off in places, or parts are rusting, typically on cookware which has been left outside), the easiest procedure is to heat the pan very hot, either in the coals of a campfire, or in an oven on 'clean' to burn off the previous coating (don't do this with a pan coated in wax, the wax will burn and smoke), then brush with steel wool until the metal pan starts to show through. You will need to season with several coats of an oil like crisco or coconut, and this will take a lot of time. It's rarely necessary to strip a pan unless it is in awful condition.
At the point you're at, I'd assume that any wax or residue is gone from your work with the steel wool, and that you don't need to go as far as to strip the whole thing. To salvage it, put aside the steel wool, scrub with a plastic brush and hot water until the black residue is gone. Clean a little more using a rag and oil (which will pick up oil-soluble debris) until that is clear. Then season as you normally would, using a light oil like crisco in the oven.
Best Answer
Never use steel wool on teflon-coated pans!!!
You surely have scratched and damaged the teflon and some of it came off the pan.
I'd throw it away.