Lead residue on stainless steel skewer

This is quite common and pretty harmless. The scratches you see don't go very deep, nor are they very wide. My All-Clad saute pan is nearing 10 years old and has a ton of micro-scratches on the interior. It still performs beautifully.

That said, the scratches can grab onto proteins and cause sticking. However, this is simple to prevent with both oil and proper pan preheating.

When a pan is preheated properly the metal expands, essentially closing all of the micro-scratches. This prevents the proteins from grabbing onto them and getting stuck. You obviously need oil/fat to assist with this as well.

To properly heat a pan to the appropriate temperature I suggest using the water drop method. If you put a cold pan on heat and drip a drop of water onto it, the water will sit there for several seconds then boil away. As the pan gets warmer this will happen more quickly, fizzling away in a second or so. Once the scratches start to close something weird happens.

First, the drop of water will break into a few mini drops which scoot around the pan as they evaporate. This is a sign that you are almost there. When the drop of water stays whole (mostly) and scoots around the pan like a mercury ball, this is the perfect temperature. I the water instantly vaporizes on contact, you've gone way too far and need to let the pan cool down. At this point you should add your oil/fat, swirl it around, and immediately add your food. (Make sure the mercury ball of water is gone before adding oil).

Also note that the mercury-ball phase is definitely too hot for unclarified butter, and may be too hot for some extra-virgin olive oils. They may instantly smoke upon adding.

Again, it's important to have your oil and ingredients in place (mise en place) before you start. It's quite easy to skyrocket past the mercury-ball phase if you have to open your oil, pour, and then season your ingredients.

Typically "oven safe" indicates that none of the components will break down in high heats. As there are no plastic or wooden components, and the utensil is all metal, it would appear that it is oven safe. Assuming there are no other chemical compounds used in the fry pan that would break down you should be good to go and toss it in the oven as long as you wear a mitt when you pull it out.