Beko DW603
I’ve replaced both the heating element and the thermostat with new parts. It’s still not heating. Looking online I’ve not been able to find what else could be causing the problem and what else I can do ? Thanks
OK. So I took the dishwasher apart again. I tested the old and new heating element with a multimeter and it was ok. Thermostat ok too. So I am thinking it’s the PCB which holds the relay switch. Is that a fair assessment?
Best Answer
You need to continue troubleshooting the problem.
If the dishwasher still has power, and assuming that the parts you used for the replacements are actually functional and not defective, and assuming that they were installed correctly, then the issue has been narrowed down to be between the replaced parts and the incoming power.